LED Display & Digital Signage › RLED · Outdoor

REALLY outdoor LED display on a building facade

REALLYRLED Series · Outdoor

Outdoor LED Display · P3–P10 · 6 Models

Outdoor LED · RLED P3–P10

Q: Is it bright enough to read in full tropical sunlight?

Yes. White-balance brightness exceeds 5,500 nits on the P3 build and reaches 6,500 nits across the series — the level needed for billboards, facades and stadiums facing direct sun. SMD black-lamp LEDs keep contrast at 3000:1 so the image stays saturated, not washed out.

Q: Which pixel pitch matches my viewing distance?

Six pitches from P3 to P10 are available. As the documented reference, the P3 build lists a recommended viewing distance over 4 m with 111,111 px/m² density — suited to street-level advertising. Larger pitches serve longer distances such as highway billboards; send us your site distance and we will size it.

Q: What is the waterproof rating for rainy seasons?

Outdoor-rated cabinets carry IP65 on the front face and IP43 on the rear — the LED surface withstands driving rain and dust while the back stays protected inside the screen structure. The operating envelope is −20 °C to 50 °C at 10–80% RH, covering tropical wet seasons.

Q: How much power should I budget per square meter?

On the P3 build, plan 850 W/m² maximum and 350 W/m² average — a 20 m² billboard therefore needs a 17 kW feed sized for peaks but averages about 7 kW. Input is 220 V AC ±10% at the cabinet. Size cabling and breakers on the maximum figure, billing estimates on the average.

Q: How is a broken module replaced on site?

Modules release in about 5 seconds, so a technician swaps a failed 192×192 mm module (64×64 px on P3) without dismounting the 576×576 mm cabinet. Keep a few spare modules per project and screen downtime stays in minutes. The driver is a high-grayscale constant-current IC at 16-bit, ≥3840 Hz.

Q: How far can the control room be from the screen?

Up to 100 m over Cat5e cable, or up to 10 km over single-mode fiber. For a rooftop billboard controlled from a ground-floor office, fiber removes the distance constraint entirely. Viewing angles are 120°/120°, so street coverage stays wide from a high mounting point.

Sunlight-readable LED walls from 3 to 10 mm pitch — above 5,500 nits white-balance brightness, black-lamp SMD packages for daytime contrast, and cabinets built to shrug off rain and dust on the outdoor-rated models.

>6500 nits · peak white-balance brightnessIP65 · front protection (outdoor models)≥3840 Hz · refresh rate16 bit · grayscale5 s · module removal, front or rear

Choose your pitch — six models on this page

Match pitch to the closest real viewing distance: P3 from 4 m, P4 from 8 m, P5 from 10 m, P6 from 12 m, P8 from 16 m, P10 from 20 m. A coarser pitch at the right distance looks identical and costs meaningfully less per square metre. Selection updates the tables and the WhatsApp message.

Get Best Price on WhatsApp Request a quote ↓

Lead time · In stock: at your forwarder’s China warehouse 3 days after payment · Not in stock: 7–15 working days · Then air 5–10 days / sea 25–45 days to your port

Terms · Sample orders welcome · Quotation / PI fixes models, prices, Incoterms (EXW or FOB, each quoted separately), lead time and T/T payment · Defective units: free spare units agreed per order (quantity depends on order size) and written into the quotation · Warranty: up to 5 years on Zhongxin Shutong industrial switches, manufacturer warranty on other brands · Full terms, warranty & RMA

Need the PDF datasheet? Get it on WhatsApp →

Corporate orders are registered with the manufacturer under your company name — genuine supply you can verify at the source.

6500nits white-balance peak (P6/P10)

3840 Hzrefresh — clean on camera

IP65front protection, outdoor models

6pitches: 3 / 4 / 5 / 6 / 8 / 10 mm

Six pitches cover the full range of outdoor jobs: P3 for close-range street-level screens read from 4 m, P4/P5 for storefronts and plazas, and P6/P8/P10 for facades, billboards and stadium perimeters read from 12 m and beyond. White-balance brightness runs above 5,500–6,500 nits depending on model, with 16-bit grayscale and ≥3840 Hz refresh so footage stays smooth on broadcast cameras. P3, P8 and P10 carry IP65 front / IP43 rear protection and P6 is IP65-rated; P4 and P5 are IP20 cabinets for sheltered or semi-outdoor positions — check the table and tell us where the screen will hang. Modules release from front or rear in about five seconds, and wall mounting needs only a simple square-steel frame.

Is this the right display for your project?

Plain-language guide — based only on what this product actually does.

Billboards & facadesP6–P10 with above 6,000-nit brightness stays readable facing the afternoon sun; 920 W/m² peak power on P10 is the number your electrical contractor needs.

Street-level & storefrontP3 reads cleanly from 4 m — right for pedestrian traffic. For covered storefronts, the IP20-rated P4/P5 keep cost down where full weather sealing is unnecessary.

Stadiums & transport hubs≥3840 Hz refresh keeps perimeter and concourse screens flicker-free on broadcast cameras; quick-release modules matter when service windows are short.

Not the right pick if you need…

Indoor close viewing under 4 m — that is fine-pitch territory; see the Fine-Pitch or COB LED pages
A self-contained outdoor advertising unit with player, cooling and enclosure included — that is the Outdoor Digital Signage page
Fully exposed installation on a tight budget — P4/P5 are IP20; pick P3/P6/P8/P10 or ask us to spec protection for your site

Worried about the source? Order under your own company name.

1 · Company name2 · Corporate bank payment3 · Order registered in your name

Using your own freight forwarder? No problem.

EXW / FOBDelivery to your forwarder's warehouseNo minimum order

How to get a better price

Volume DiscountBulk quantities of a single model

Mix & Match DiscountMix any categories & models storewide in one order — no quantity limit

BETTER

Verified Project PriceDistributor, integrator or end user with a real project? Send the BOQ — project pricing plus free system design. Partner projects are protected: we never quote your end customer behind you

BEST

All discounts are quoted personally — message me on WhatsApp ↑

Key Features

The complete series capability list.

White-balance brightness above 5,500–6,500 nits — legible in direct sunlight, uniform color with no mosaic effect

SMD black-lamp packages — better color consistency and higher perceived contrast in daylight

Front and rear modules release in about 5 seconds — fast service without unstacking cabinets

Sealed face design with professional mask — dust- and water-protected, IP65-front on outdoor-rated cabinets

Aged and tested from −20 °C to 60 °C white-screen burn-in before shipping

Anti-static, anti-interference, corrosion-resistant component design for coastal and industrial air

Wall mounting on a simple square-steel frame — no heavy custom structure for standard installs

Seamless splicing with micro-adjustable cabinet gaps across the whole screen

Full Specifications

Series specifications — technical values in English.

Highlighted column = the model selected above. Values are series data — confirm the final configuration with us before ordering.

Module & cabinet

Item	RLED-P3	RLED-P4	RLED-P5	RLED-P6	RLED-P8	RLED-P10
Pixel pitch	3 mm	4 mm	5 mm	6 mm	8 mm	10 mm
Module size	192×192 mm	256×128 mm	320×160 mm	192×192 mm	256×128 mm	320×160 mm
Module resolution	64×64 px	64×32 px	64×32 px	32×32 px	32×16 px	32×16 px
Pixel structure	1R1G1B
LED package	SMD 1921	SMD 1921	SMD 2727	SMD 2727	SMD 3535	SMD 3535
Cabinet size	576×576 mm	1024×768 mm	960×960 mm	960×960 mm	1024×768 mm	960×960 mm
Cabinet resolution	192×192 px	256×192 px	192×192 px	160×160 px	128×96 px	96×96 px

Screen performance

Item	RLED-P3	RLED-P4	RLED-P5	RLED-P6	RLED-P8	RLED-P10
Pixel density	111,111 px/m²	62,500 px/m²	40,000 px/m²	27,777 px/m²	15,625 px/m²	10,000 px/m²
White-balance brightness	>5500 nits	>6000 nits	>5500 nits	>6500 nits	>6000 nits	>6500 nits
Grayscale	16 bit
Contrast	3000:1
Refresh rate	≥3840 Hz
Drive method	High-grayscale constant-current driver IC
Viewing angle (H / V)	120° / 120°
Ingress protection	IP65 front / IP43 rear	IP20	IP20	IP65	IP65 front / IP43 rear	IP65 front / IP43 rear
Max / average power (per m²)	850 / 350 W	850 / 350 W	850 / 350 W	850 / 360 W	850 / 360 W	920 / 368 W
Operating temperature	−20 °C to 50 °C
Operating humidity	10–80% RH
Input voltage	220 V AC ±10%
Recommended viewing distance	>4 m	>8 m	>10 m	>12 m	>16 m	>20 m
Control distance	Cat5e < 100 m · single-mode fiber < 10 km

Engineering note: IP ratings differ inside this series — P4 and P5 are IP20 cabinets and belong under cover, not in open weather. Send us a photo or drawing of the mounting position and we will confirm which pitch and protection level actually fits before you commit.

Outdoor LED Screen FAQ — RLED P3–P10

Is it bright enough to read in full tropical sunlight?

Yes. White-balance brightness exceeds 5,500 nits on the P3 build and reaches 6,500 nits across the series — the level needed for billboards, facades and stadiums facing direct sun. SMD black-lamp LEDs keep contrast at 3000:1 so the image stays saturated, not washed out.

Which pixel pitch matches my viewing distance?

Six pitches from P3 to P10 are available. As the documented reference, the P3 build lists a recommended viewing distance over 4 m with 111,111 px/m² density — suited to street-level advertising. Larger pitches serve longer distances such as highway billboards; send us your site distance and we will size it.

What is the waterproof rating for rainy seasons?

Outdoor-rated cabinets carry IP65 on the front face and IP43 on the rear — the LED surface withstands driving rain and dust while the back stays protected inside the screen structure. The operating envelope is −20 °C to 50 °C at 10–80% RH, covering tropical wet seasons.

How much power should I budget per square meter?

On the P3 build, plan 850 W/m² maximum and 350 W/m² average — a 20 m² billboard therefore needs a 17 kW feed sized for peaks but averages about 7 kW. Input is 220 V AC ±10% at the cabinet. Size cabling and breakers on the maximum figure, billing estimates on the average.

How is a broken module replaced on site?

Modules release in about 5 seconds, so a technician swaps a failed 192×192 mm module (64×64 px on P3) without dismounting the 576×576 mm cabinet. Keep a few spare modules per project and screen downtime stays in minutes. The driver is a high-grayscale constant-current IC at 16-bit, ≥3840 Hz.

How far can the control room be from the screen?

Up to 100 m over Cat5e cable, or up to 10 km over single-mode fiber. For a rooftop billboard controlled from a ground-floor office, fiber removes the distance constraint entirely. Viewing angles are 120°/120°, so street coverage stays wide from a high mounting point.

Ordering questions — samples, shipping, payment, lead time and genuine stock — are answered once on our FAQ page.