Genuine product photo · industrial fiber media converter, DIN-rail and card-insert
ZJIC200-2
Unmanaged Fiber Media Converter · 100/1000M
Industrial 100/1000M Fiber Media Converter · 1×RJ45 + 1×Fiber (SC/ST/FC) · DIN-Rail / Wall / Card-Insert
Project-Based Pricing
Volume & combo discounts — get your quote
In-stock models: 3 days to your forwarder's warehouse in China after payment · Out-of-stock: 7–15 working days · then air 5–10 days or sea 25–45 days to your port
Get Best Price on WhatsAppRequest a quote ↓Terms · Sample orders welcome · Quotation / PI fixes models, prices, Incoterms (EXW or FOB, each quoted separately), lead time and T/T payment · Defective units: free spare units agreed per order (quantity depends on order size) and written into the quotation · Warranty: up to 5 years on Zhongxin Shutong industrial switches, manufacturer warranty on other brands · Full terms, warranty & RMA
Need the PDF datasheet? Get it on WhatsApp →How to get a better price
Volume DiscountOrder 50+ pcs of this model
CONTACT US
Project Combo DiscountMix any categories & models storewide in one order — no quantity limit
BIGGER
Verified Project DiscountDistributor, integrator or end user with a real project? Send the BOQ — project pricing plus free system design. Partner projects are protected: we never quote your end customer behind you
BIGGEST
All discounts are quoted personally — message me on WhatsApp ↑
◆100/1000M Fiber Media Converter
◆SC/ST/FC Selectable
◆DIN-Rail / Wall / Card-Insert
◆DC 24/48V & AC 220V
◆-40 ~ 75°C Wide Temp
◆5-Year Warranty
Overview
The ZJIC200-2 series is an industrial 100/1000M fiber media converter that converts a 10/100/1000Base-T electrical signal to a 100Base-FX or 1000Base-X optical signal over a single fixed fiber port (SC/ST/FC, single-mode/multimode, single/dual-fiber selectable). It uses a redundant power design with wide-voltage input, offering overload protection, reverse-polarity protection and a power-failure alarm. An optional wide-temperature version and strong EMC immunity meet demanding industrial environments, delivering economical and reliable network access.
Is This the Right Fit?
Six real deployment scenarios matched to this model's actual datasheet specifications.
Fiber media conversion for copper-to-fiber uplink pointsConverts a 10/100/1000Base-T copper port to 100Base-FX or 1000Base-X fiber over a single fixed fiber port, with SC/ST/FC and single/dual-fiber options.
DIN-rail media converter for control-cabinet fiber uplinksDIN-rail mounting with AC 220V, DC 24V (12–36V) or DC 48V (10–52V) input, DC models with redundant dual power.
Wide-temperature fiber media converter for outdoor roadside cabinetsOptional wide-temperature version operates from -40 to +75°C, with -40 to +85°C storage range, for harsh outdoor sites.
Low-power, maintenance-free media conversion for unattended sitesIP40 metal enclosure, max 3 W power draw and 320,000-hour MTBF support long-term unattended operation in cabinets.
Card-insert (slot-in) fiber media converter for chassis integrationAlso offered in card-insert form (ZJIC200-1T1S-DC / -1GT1F-DC), 26×88×110 mm with DC 5V gold-finger power, for slot-based chassis deployment alongside the DIN-rail/wall-mount models.
Long-distance fiber uplink for roadside camera backhaul100Base-FX reaches 2 km multimode or 20/40/60/120 km single-mode; 1000Base-X reaches 0.5/2 km multimode or 20/40/60/120 km single-mode, with SC/ST/FC connector options.
Not a good fit if:
- No PoE output — connected cameras or APs on the copper side need their own power source or an external PoE injector.
- Unmanaged, single fixed fiber port per unit — no VLAN/RSTP/ring-network redundancy; not a substitute for a managed ring-topology switch.
- IP40 enclosure only — needs a cabinet or additional protection for direct outdoor rain/dust exposure.
Key Features
- Supports 1×10/100Base-T or 10/100/1000Base-T electrical port
- Supports 1×100Base-FX or 1000Base-X (fixed fiber port)
- SC/ST/FC fiber connector optional, transmission distance selectable
- DIN-rail: DC 24V/48V or AC 220V power input optional; card-insert: DC 5V power input
- Industrial IP40 protection rating
- DIN-rail / wall-mount / card-insert installation supported
- -40 ~ +75°C wide-temperature operation (optional)
Specifications
IEEE Standards
| IEEE802.3 | 10BaseT Ethernet |
| IEEE802.3u | 100BaseT(X) and 100BaseFX Fast Ethernet |
| IEEE802.3ab | 1000BaseT(X) Ethernet |
| IEEE802.3z | 1000BaseX Ethernet |
| IEEE802.3x | Flow Control |
Switching
| MAC Address Table | 1K |
| Packet Buffer | 1 Mbit |
| Forwarding | Store-and-forward |
Interfaces
| RJ45 Port | 1 × 10/100Base-T or 10/100/1000Base-T |
| Fiber Port | 1 × 100Base-FX or 1000Base-X (fixed), single-mode/multimode, SC/ST/FC and single/dual-fiber selectable |
| 100Base-FX Distance | Multimode 2 km; single-mode 20/40/60/120 km optional |
| 1000Base-X Distance | Multimode 0.5/2 km; single-mode 20/40/60/120 km optional |
| LED Indicators | Power, electrical port, fiber port |
Power
| 5V Input | DC 5V, gold-finger (card-insert) |
| 24V Input | 4-pin terminal, dual redundant input; 24VDC supports 12–36VDC |
| 48V Input | 4-pin terminal, dual redundant input; 48VDC supports 36–56VDC |
| 220V Input | 4-pin terminal, single power input; 220V supports 100–240VAC |
| Power Consumption | Max 3 W |
| Power Protection | Reverse-polarity & overload |
Physical
| Housing | IP40 metal enclosure |
| Mounting | DIN-rail, wall-mount, or card-insert |
| Dimensions | DIN-rail/wall-mount 32(W)×144(H)×95(D)mm; card-insert 26(W)×88(H)×110(D)mm |
Certification
| EMC | CE, FCC |
| EMI | FCC Part 15, EN 55032 (CISPR 32) Class A |
| EMS | EN61000-4-2/3/4/5/6/8 Level 3 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Green | RoHS, WEEE |
Environment
| Standard Temp | -10 ~ +60°C |
| Wide Temp | -40 ~ +75°C |
| Storage Temp | -40 ~ +85°C |
| Humidity | 5–95% non-condensing |
Reliability
| MTBF | 320,000 hours |
| Warranty | 5 years |
Models & Ordering
| Model | Product Description | Price |
|---|---|---|
| ZJIC200-D-1T1S-AC | DIN-rail industrial fiber media converter — 1×10/100Base-T + 1×100Base-FX (SC/ST/FC optional), AC 220V (100–240V). | |
| ZJIC200-D-1T1S-DCH | DIN-rail industrial fiber media converter — 1×10/100Base-T + 1×100Base-FX (SC/ST/FC optional), DC 48V (10–52V), redundant input. | |
| ZJIC200-D-1T1S-DCL | DIN-rail industrial fiber media converter — 1×10/100Base-T + 1×100Base-FX (SC/ST/FC optional), DC 24V (12–36V), redundant input. | |
| ZJIC200-D-1GT1F-AC | DIN-rail industrial fiber media converter — 1×10/100/1000Base-T + 1×1000Base-X (fixed), AC 220V (100–240V). | |
| ZJIC200-D-1GT1F-DCH | DIN-rail industrial fiber media converter — 1×10/100/1000Base-T + 1×1000Base-X (fixed), DC 48V (10–52V), redundant input. | |
| ZJIC200-D-1GT1F-DCL | DIN-rail industrial fiber media converter — 1×10/100/1000Base-T + 1×1000Base-X (fixed), DC 24V (12–36V), redundant input. | |
| ZJIC200-1T1S-DC | Card-insert industrial fiber media converter — 1×10/100Base-T + 1×100Base-FX (SC/ST/FC optional), DC 5V (gold-finger). | |
| ZJIC200-1GT1F-DC | Card-insert industrial fiber media converter — 1×10/100/1000Base-T + 1×1000Base-X (fixed), DC 5V (gold-finger). |
Fiber interface options across the series: 100Base-FX reaches 2 km multimode or 20/40/60/120 km single-mode; 1000Base-X reaches 0.5/2 km multimode or 20/40/60/120 km single-mode; SC/ST/FC connector and single/dual-fiber selectable. DIN-rail models accept AC 220V, DC 24V or DC 48V (DC models have redundant dual input); card-insert models are powered by DC 5V via gold-finger connector.
Dimensions
unit: mm
Your Brand. Factory-Direct Supply.Neutral casing, ready for your logo · Custom port/power options · Small batches welcome.
Custom & OEM →Who uses it, where it goes and how to install it
Written for the ZJIC200-2 series from its own specifications: 1 copper port (10/100 or 10/100/1000Base-T) to 1 fixed fiber port (100Base-FX or 1000Base-X), reach up to 120 km single-mode, DIN-rail AC/DC or 5V card-insert, max 3 W.
Who it is for
- CCTV installers with remote poles and gates — When a camera point or a small PoE switch is more than 100 m from the NVR, one converter at each end replaces copper with fiber: 2 km on multimode or 20/40/60/120 km on single-mode.
- Utilities, substations and traffic/ITS — DIN-rail units with redundant DC 24V or 48V input, -40 ~ +75°C wide-temperature option and Level 3 EMC immunity fit roadside and substation cabinets.
- Factories linking PLCs and HMIs between buildings — The 10/100Base-T + 100Base-FX version is enough for control traffic; fiber removes ground-loop and interference problems on runs between halls.
- Telecom rooms and central offices — Card-insert models (ZJIC200-1T1S-DC / ZJIC200-1GT1F-DC, DC 5V gold-finger) slide into a chassis at the head end, so many fiber links terminate in one place.
Where and how to install
- Remote end: cabinet on the pole or wall — Put the DIN-rail unit (32 × 144 × 95 mm) in a closed outdoor enclosure with the PoE switch or camera power supply; the housing is IP40, so it must not be exposed to rain. Use the wall-mount option if there is no rail.
- No PoE on the copper port — The RJ45 port does not supply power. Feed the camera with a PoE injector or a PoE switch at the remote end, and keep the copper run from converter to camera within 100 m.
- Power wiring — DC 24V models accept 12–36VDC and DC 48V models 36–56VDC on a 4-pin terminal with dual redundant inputs; AC 220V models take a single 100–240VAC input. Consumption is max 3 W, so a small DIN-rail supply is enough. Check polarity even though reverse-polarity protection is built in.
- Fiber handling — Order the fiber port to match the installed cable: single-mode or multimode, SC/ST/FC, single or dual fiber. Terminate the outdoor cable in a splice box, use a short patch cord to the converter, keep the bend radius gentle and clean connectors before mating.
- Temperature, surge and condensation — Standard models run at -10 ~ +60°C; choose the wide-temperature model (-40 ~ +75°C) for sun-exposed or unheated boxes. Humidity is rated 5–95% non-condensing, so seal cable glands and add a drain or heater in humid climates. Ground the enclosure and put a surge protector on the copper and power lines at the pole.
Link planning: 100M or gigabit version
Both versions have one copper and one fixed fiber port. The gigabit version carries about 10× the traffic, which matters when a small switch with several cameras sits behind the converter.
| 1T1S · 100M | 1GT1F · Gigabit | |
|---|---|---|
| Copper port | 1 × 10/100Base-T | 1 × 10/100/1000Base-T |
| Fiber port | 1 × 100Base-FX (fixed) | 1 × 1000Base-X (fixed) |
| Multimode reach | 2 km | 0.5 / 2 km |
| Single-mode reach | 20 / 40 / 60 / 120 km | 20 / 40 / 60 / 120 km |
| Cameras per link (8 Mbps each, ≤70% load) | ≈ 8 | ≈ 87 |
| DIN-rail models | ZJIC200-D-1T1S-AC / -DCL / -DCH | ZJIC200-D-1GT1F-AC / -DCL / -DCH |
| Card-insert model (DC 5V) | ZJIC200-1T1S-DC | ZJIC200-1GT1F-DC |
| Power consumption | Max 3 W | Max 3 W |
- Pick the 1T1S (100M) version for one camera, a PLC or an access-control panel per link.
- Pick the 1GT1F (gigabit) version when a switch with more than about 8 cameras is behind the converter, or when you want headroom for later.
Port, reach and power values are from the ZJIC200-2 manufacturer datasheet. Camera counts assume 8 Mbps per camera (main + sub stream) and at most 70% of the link speed: 70 ÷ 8 and 700 ÷ 8, rounded down.
Industrial Media Converter FAQ — ZJIC200-2
What does the ZJIC200-2 media converter do?
It converts one RJ45 copper port — 10/100Base-T or 10/100/1000Base-T depending on version — into a fixed 100Base-FX or 1000Base-X fiber port, extending Ethernet far beyond copper limits for roadside or plant links. Switching is store-and-forward with a 1K MAC table and 1 Mbit buffer.
What fiber distances are supported?
At 100M: multimode 2 km, single-mode 20/40/60/120 km optional. At gigabit: multimode 0.5 or 2 km, single-mode 20/40/60/120 km optional. Connectors are SC, ST or FC in single- or dual-fiber versions — state the speed, distance and connector when ordering.
How is the ZJIC200-2 powered?
Four options: DC 5V gold-finger for the card-insert version, DC 24V (12–36V) or DC 48V (36–56V) with dual redundant terminal inputs, or AC 220V (100–240V) single input. Maximum draw is 3 W, with reverse-polarity protection, overload protection and a power-failure alarm.
Which mounting versions exist?
Three: DIN-rail and wall-mount versions share a 32 x 144 x 95 mm case, while the card-insert version (26 x 88 x 110 mm) slides into a media-converter chassis and takes DC 5V through a gold-finger connector — convenient for high-density equipment-room installations.
Is it suitable for harsh industrial environments?
Yes — the standard version runs from -10 to +60 degC and the wide-temperature option from -40 to +75 degC, at 5–95% non-condensing humidity. The IP40 metal housing carries CE/FCC EMC with EN61000-4 Level 3 immunity, MTBF of 320,000 hours and a 5-year warranty.
Can a gigabit ZJIC200-D-1GT1F talk to a 100M ZJIC200-D-1T1S at the other end?
No. The fiber side is fixed at 1000Base-X on the 1GT1F and 100Base-FX on the 1T1S, and fixed fiber ports do not negotiate speed with each other. Always order the two ends as the same version, with the same fiber mode, connector and single/dual-fiber type. The copper port of each unit can still connect to 10/100 devices.
Can I connect the ZJIC200-2 fiber port directly to an SFP port on my switch or NVR?
Often yes, if the SFP module in the switch matches the converter exactly: same speed (100Base-FX or 1000Base-X), same fiber mode, same connector and, for single-fiber links, complementary wavelengths. The datasheet does not list the wavelengths, so tell us the SFP module model and we will match the converter before you order. Otherwise, use a converter pair, one at each end.
How many IP cameras can I run over one ZJIC200-2 fiber link?
It depends on the version and the bitrate. Assuming 8 Mbps per camera (main plus sub stream) and keeping the link at or below 70% load, the 100M version carries about 8 cameras and the gigabit version about 87. The converter has only one copper port, so put a switch behind it for more than one camera, and the RJ45 port has no PoE.
Do the card-insert ZJIC200-1T1S-DC and ZJIC200-1GT1F-DC work on their own?
No. They are powered by DC 5V through the gold-finger edge connector and must be inserted into a chassis, such as our ZJIC200-JJ media converter chassis. Use them at the head end where many links terminate, and use the DIN-rail ZJIC200-D models at the remote ends. Card size is 26 × 88 × 110 mm.
Should I choose the ZJIC200-2 or the 3-port ZJIC200-3?
Choose the ZJIC200-2 when only one device or one switch connects at each end; it is the only one of the two with a card-insert version for a chassis. The ZJIC200-3 has 2 copper ports plus 1 fiber port, which saves a small switch when two devices, for example two cameras or a camera and an access controller, share one remote point.
What power connector does the ZJIC200-2 have, and do I need to confirm it before ordering?
Yes, please confirm the power connector with us before ordering. For Zhongxin Shutong products the power input type and connector can differ between versions and batches, so tell us your supply (AC or DC and the voltage), how you will wire it in the cabinet and your country's plug standard, and we confirm the exact connector and supply version of the ZJIC200-2 for your order.
Ordering questions — samples, shipping, payment, lead time and genuine stock — are answered once on our FAQ page.
Our own line — Zhongxin Shutong industrial switches1,500 m² clean rooms100% port-by-port tested-40…+75 °C rated, cycled to +85 °CEN 61000-4 Level 3 EMC immunitySerial-number traceability on every unitISO 9001 · 14001 · 27001 · CMMI L3See the factory →See all certifications →
Every order, any brand: there is no return policy — defective units are covered by free spare units agreed per order and written into the quotation. Warranty up to 5 years on the Zhongxin Shutong industrial line, manufacturer warranty on other brands. Terms, warranty & RMA
Request a quote for this product
An engineer replies within 24 hours on working days with model check, price and lead time. No obligation, no newsletters.
Product: ZJIC200-2
For a fast, exact quote tell us: model or requirement · quantity · destination country / port · EXW or FOB · deadline.