Datasheet product photo · 16-slot rack-mount conversion chassis
ZJIC200-JJ
16-Slot Chassis · Dual PSU · SC/ST/FC
Industrial 2U Rack-Mount Media Conversion Chassis · 16 Slots · Dual PSU
Project-Based Pricing
Volume & combo discounts — get your quote
In-stock models: 3 days to your forwarder's warehouse in China after payment · Out-of-stock: 7–15 working days · then air 5–10 days or sea 25–45 days to your port
Get Best Price on WhatsAppRequest a quote ↓Terms · Sample orders welcome · Quotation / PI fixes models, prices, Incoterms (EXW or FOB, each quoted separately), lead time and T/T payment · Defective units: free spare units agreed per order (quantity depends on order size) and written into the quotation · Warranty: up to 5 years on Zhongxin Shutong industrial switches, manufacturer warranty on other brands · Full terms, warranty & RMA
Need the PDF datasheet? Get it on WhatsApp →How to get a better price
Volume DiscountOrder 50+ pcs of this model
CONTACT US
Project Combo DiscountMix any categories & models storewide in one order — no quantity limit
BIGGER
Verified Project DiscountDistributor, integrator or end user with a real project? Send the BOQ — project pricing plus free system design. Partner projects are protected: we never quote your end customer behind you
BIGGEST
All discounts are quoted personally — message me on WhatsApp ↑
◆16-Slot Chassis
◆100M/1000M Mixed Cards
◆Dual Power Redundant
◆SC/ST/FC Optical
◆IP40 · 2U Rack-Mount
◆5-Year Warranty
Overview
The ZJIC200-JJ is an industrial fiber media converter chassis built in a standard 2U rack-mount enclosure with 16 card slots for 1-electrical/1-optical Fast Ethernet or Gigabit conversion modules. Each slot accepts mixed 100M and 1000M cards with SC/ST/FC optical connector options and multimode (0.5km/2km) or single-mode (20/40/60/120km) fiber reach. The chassis integrates two independent 220V power inputs for redundancy inside an IP40 metal housing rated -10~60°C standard (-40~75°C wide-temperature cards available), carries CE/FCC/RoHS EMC and EN61000-4 series EMS certification, and ships with a 5-year warranty.
Is This the Right Fit?
Six real deployment scenarios matched to the ZJIC200-JJ chassis's actual datasheet specifications.
Fiber Media Conversion PointEach of the 16 slots accepts a dedicated 1-electrical/1-optical conversion card (100M or Gigabit, SC/ST/FC), turning the chassis into a dense photoelectric conversion point for copper-to-fiber handoff.
Mixed 100M/1000M Card Flexible Configuration100M and Gigabit conversion cards can be freely mixed across the 16 slots per the datasheet, so one chassis serves legacy Fast Ethernet links and newer Gigabit fiber links side by side without needing a separate frame for each speed.
Centralized 16-Port Media Conversion Rack for Equipment RoomsThe datasheet frames this 2U chassis as its solution for high-density photoelectric conversion needs — instead of 16 separate desktop converters scattered across an equipment room, one rack position with 16 slots centralizes every CCTV or network fiber uplink in one place.
Redundant Dual-Power Supply for Mission-Critical RoomsThe datasheet states the chassis supports two independent 220V power paths (redundant dual power supply) plus EN61000-4-2/3/4/5/6/8 EMS immunity — built for tunnel, mine, and mechanical/electrical equipment rooms where a single power-line fault must not take the whole conversion rack offline.
Extreme-Temperature Equipment CabinetA wide-temperature card option is rated -40~75°C per the datasheet, letting the chassis keep converting inside unheated outdoor cabinets through winter cold and summer heat.
19-Inch Rack Cabinet InstallationThe datasheet specifies rack-mount installation (480×90×290mm, 2U) rather than DIN-rail or wall-mount — the chassis bolts directly into a standard 19-inch rack cabinet, keeping all 16 conversion slots organized in one rack unit alongside other rack gear in the equipment room.
Not a Good Fit If:
- No PoE output on any card slot — cameras/APs still need a separate PoE injector or PoE switch upstream.
- No built-in management interface (Web/SNMP) — per-slot link status cannot be monitored remotely from a NOC.
- Not a desktop or DIN-rail form factor — needs a 19" rack position (480×90×290mm), unsuitable for compact wall-mount cabinets.
Key Features
- 16 card slots for 1-electrical/1-optical Fast Ethernet or Gigabit conversion modules
- Mixed 100M / 1000M card insertion in any slot combination
- SC/ST/FC optical connectors · multimode 0.5/2km or single-mode 20/40/60/120km
- Dual built-in 220V power modules — independent redundant supply
- 2U rack-mount IP40 metal chassis · reverse-polarity & overload protection
- Store-and-forward switching per card · 1K MAC table · 1Mbit buffer
- IEEE 802.3/802.3u/802.3ab/802.3z compliant · CE/FCC/RoHS certified · 5-year warranty
Specifications
IEEE Standards
| IEEE802.3 | 10BaseT Ethernet |
| IEEE802.3u | 100Base-T(X) & 100Base-FX Fast Ethernet |
| IEEE802.3ab | 1000Base-T(X) Ethernet |
| IEEE802.3z | 1000Base-X Ethernet |
| IEEE802.3x | Flow Control |
Switching
| MAC Address Table | 1K |
| Packet Buffer | 1 Mbit |
| Forwarding | Store-and-forward |
Interfaces
| RJ45 Port | 1 per card, 100M or Gigabit |
| Fiber Port | 1 fixed per card, 100M or Gigabit, SC/ST/FC selectable |
| Optical Reach | Multimode 0.5km/2km; single-mode 20/40/60/120km selectable |
| LED Indicators | Power, electrical port, optical port |
Power
| 220V Input | Two independent power paths (redundant) |
| Power Consumption | Max 25 W |
| Power Protection | Reverse-polarity & overload |
Physical
| Housing | IP40 metal enclosure |
| Mounting | Rack-mount (2U) |
| Dimensions | 480 (W) × 90 (H) × 290 (D) mm |
Certification
| EMC | CE, FCC |
| EMI | FCC Part 15, EN 55032 (CISPR 32) Class A |
| EMS | EN61000-4-2/3/4/5/6 (Level 3), EN61000-4-8 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Green | RoHS, WEEE |
Environment
| Standard Temp | -10 ~ +60°C |
| Wide Temp | -40 ~ +75°C |
| Storage Temp | -40 ~ +85°C |
| Humidity | 5–95% non-condensing |
Reliability
| MTBF | 320,000 hours |
| Warranty | 5 years |
Models & Ordering
| Model | Product Description | Price |
|---|---|---|
| ZJIC200-JJ | 2U rack-mount chassis, 16 slots, 2 built-in power modules. |
This page covers the ZJIC200-JJ 16-slot chassis itself. 1-electrical/1-optical conversion cards (100M/1000M, SC/ST/FC, multimode/single-mode reach options) are ordered separately according to project requirements.
Dimensions
unit: mm
Your Brand. Factory-Direct Supply.Neutral casing, ready for your logo · Custom port/power options · Small batches welcome.
Custom & OEM →Who uses it, where it goes and how to plan the links
Written for the ZJIC200-JJ from its own datasheet: 2U 19-inch rack chassis, 16 slots for 1-copper/1-fibre 100M or Gigabit cards, two independent 220 V power inputs, max 25 W, IP40 metal housing.
Who it is for
- CCTV and network integrators with many fibre runs — Up to 16 fibre links from poles, gates or remote buildings end in one 2U rack position at the control room, instead of 16 desktop converters and 16 power adapters on a shelf.
- Campuses, factories and ports upgrading in stages — 100M and Gigabit cards can be mixed in the same chassis, so old Fast Ethernet links keep running while new Gigabit links are added card by card.
- Utilities, telecom rooms and plant control rooms — Two independent 220 V power paths keep all 16 links up if one supply or one circuit fails, and the EMS immunity is EN61000-4-2/3/4/5/6 Level 3 plus EN61000-4-8.
- Projects that mix short and long fibre runs — Each card is ordered with its own optics: multimode 0.5 km or 2 km for in-building runs, single-mode 20/40/60/120 km for links between sites, with SC, ST or FC connectors to match existing patch panels.
Where and how to install
- 19-inch rack, 2U — The chassis is 480 × 90 × 290 mm and is rack-mount only, so plan a 2U position in a 19-inch cabinet at least 290 mm deep plus space behind for power cords. Put it next to the fibre patch panel so jumpers stay short.
- Use both power inputs on different circuits — Redundancy only helps if the two 220 V inputs come from different sources, for example one from the UPS and one from mains or a second UPS. Maximum draw is 25 W, so even a small UPS carries the whole chassis for a long time.
- Match each card to the far end — A card only links to a converter or SFP port of the same speed (100M with 100M, Gigabit with Gigabit), the same fibre mode and compatible wavelength. Label each slot with the remote site name and fibre core numbers.
- Fibre handling — Keep dust caps on unused ports, clean connector end faces before plugging in, and respect the bend radius of jumpers inside the cabinet. Never look into an active fibre port.
- Indoor room, not a bare outdoor cabinet — The housing is IP40 and the standard version runs at -10 to 60°C with 5–95% non-condensing humidity. Use it in an equipment room or a climate-controlled cabinet; for cold or hot cabinets ask for the -40 to 75°C wide-temperature version, and avoid condensation in any case.
- Earthing and surge — Bond the chassis to the rack earth bar. Fibre itself carries no surge, but the copper side of each card does: if a copper port goes to equipment in another building, put an Ethernet surge protector on that run.
Link planning: what the chassis and its cards support
Think of the ZJIC200-JJ as 16 independent media converters sharing one frame and two power supplies. Each card has 1 RJ45 port and 1 fixed fibre port of the same speed; the fibre type and reach are chosen per card when ordering, so one chassis can hold, for example, 10 multimode 2 km cards for the site and 6 single-mode 20 km cards for remote buildings.
| ZJIC200-JJ | |
|---|---|
| Card slots | 16 (100M and 1000M cards can be mixed) |
| Ports per card | 1 × RJ45 + 1 × fixed fibre, 100M or 1000M |
| Fibre connectors | SC / ST / FC (selectable) |
| Multimode reach | 0.5 km / 2 km |
| Single-mode reach | 20 / 40 / 60 / 120 km |
| Switching per card | Store-and-forward, 1K MAC, 1 Mbit buffer |
| Power input / consumption | 2 independent 220 V inputs / max 25 W |
| Operating temperature | -10~60°C standard, -40~75°C wide-temp |
| Housing / mounting / size | IP40 metal / 2U rack / 480 × 90 × 290 mm |
| Management | None listed (LEDs: power, copper, fibre) |
- Pick multimode 0.5 km or 2 km cards for runs inside one building or factory site; pick single-mode 20 km and up for links between buildings or sites.
- Pick the shortest reach class that covers the measured fibre length with some margin; a 120 km card is meant for very long links, not for a 300 m run.
- Pick Gigabit cards for links carrying many cameras; a 100M card limits the whole link to 100 Mbps.
All values are from the ZJIC200-JJ datasheet. The chassis is sold without cards; the 1-copper/1-fibre cards are ordered separately per link.
Media Converter Chassis FAQ — ZJIC200-JJ
What is the ZJIC200-JJ chassis and how many links does it hold?
It is a 2U 19-inch rack enclosure with 16 card slots for 1-electrical/1-optical media-converter cards. Fast Ethernet and gigabit cards can be mixed in the same chassis, centralizing up to 16 fiber links from field converters into one tidy unit in the equipment room.
What fiber reach and connectors do the cards support?
Each card carries one RJ45 port (100M or gigabit) and one fixed fiber port with SC, ST or FC connector options. Optical reach is 0.5 or 2 km on multimode and 20, 40, 60 or 120 km selectable on single-mode, so mixed short and long links coexist in one chassis.
Does it have redundant power?
Yes — the chassis integrates two independent 220V power inputs, so a failure on one feed does not drop the 16 links. Total consumption is 25 W maximum with reverse-polarity and overload protection, low enough that the enclosure needs no special cooling arrangements.
What are its dimensions and operating conditions?
The IP40 metal enclosure measures 480 x 90 x 290 mm and mounts in a standard 19-inch rack as a 2U unit. Standard operating range is -10 to +60 degC at 5–95% non-condensing humidity, and wide-temperature cards rated -40 to +75 degC are available for harsh rooms.
Which certifications and warranty does it carry?
EMC certification covers CE and FCC (FCC Part 15, EN 55032 (CISPR 32) Class A) with EN61000-4 series immunity, plus IEC60068 shock, free-fall and vibration tests and RoHS/WEEE compliance. MTBF is rated 320,000 hours and the chassis is backed by a 5-year warranty.
What do I need at the far end of each ZJIC200-JJ fibre link?
A standalone media converter or a switch SFP port that matches the card: same speed (100M or Gigabit), same fibre mode (multimode or single-mode), compatible wavelength and a reach class that suits the distance. The connector type can differ if you use the right patch cord. Tell us the remote device model, or order matching standalone converters with the cards, and we will pair them.
Can I mix multimode and single-mode cards in one ZJIC200-JJ chassis?
The datasheet states that 100M and Gigabit cards can be mixed in the 16 slots, and the fibre reach (multimode 0.5/2 km, single-mode 20/40/60/120 km) and connector (SC/ST/FC) are options chosen per card. Because each card is an independent converter, different links in the same chassis can use different fibre. Send us your list of links with distances and fibre type and we will confirm the card set before ordering.
Can I monitor the ZJIC200-JJ from the network or replace a card while it is running?
No network management is listed: there is no web page or SNMP on the chassis, and link status is shown by the power, copper and fibre LEDs on each card. To see a link drop remotely, watch the port status on the managed switch or NVR that the card's copper port connects to. Hot-swapping of cards is not listed in the datasheet, so confirm with us before planning to change cards with power on.
Should I use 100M or Gigabit cards for CCTV links on the ZJIC200-JJ?
It depends on how many cameras share the link. A 100M card carries 100 Mbps, which at an assumed 6 Mbps per 4 MP camera is about 16 cameras before the link is full; keep a margin and plan 10–12. A Gigabit card carries 1000 Mbps, so use it for a remote switch with many cameras, a PTZ group or any backbone link, and make sure the far-end converter or SFP is also Gigabit.
Can the ZJIC200-JJ be powered from DC 48 V or installed in an outdoor cabinet?
The datasheet lists only 220 V inputs (two independent paths), so a DC-only site needs an inverter or a different product; ask us before ordering. The housing is IP40, so outdoors it must sit inside a sealed, ventilated cabinet; the standard model is rated -10 to 60°C and a -40 to 75°C wide-temperature model is listed for unheated cabinets. For a single outdoor link on DIN rail, a standalone converter such as the ZJIC200-2 or ZJIC200-3 is usually a better fit than a rack chassis.
What power connector does the ZJIC200-JJ have, and do I need to confirm it before ordering?
Yes, please confirm the power connector with us before ordering. For Zhongxin Shutong products the power input type and connector can differ between versions and batches, so tell us your supply (AC or DC and the voltage), how you will wire it in the cabinet and your country's plug standard, and we confirm the exact connector and supply version of the ZJIC200-JJ for your order.
Ordering questions — samples, shipping, payment, lead time and genuine stock — are answered once on our FAQ page.
Our own line — Zhongxin Shutong industrial switches1,500 m² clean rooms100% port-by-port tested-40…+75 °C rated, cycled to +85 °CEN 61000-4 Level 3 EMC immunitySerial-number traceability on every unitISO 9001 · 14001 · 27001 · CMMI L3See the factory →See all certifications →
Every order, any brand: there is no return policy — defective units are covered by free spare units agreed per order and written into the quotation. Warranty up to 5 years on the Zhongxin Shutong industrial line, manufacturer warranty on other brands. Terms, warranty & RMA
Request a quote for this product
An engineer replies within 24 hours on working days with model check, price and lead time. No obligation, no newsletters.
Product: ZJIC200-JJ
For a fast, exact quote tell us: model or requirement · quantity · destination country / port · EXW or FOB · deadline.