Manufacturer product photo · industrial 3-port fiber media converter
ZJIC200-3
Fiber Media Converter · 2FE/GE + 1 Fixed Fiber
Industrial 10/100/1000M Fiber Media Converter · 2 × RJ45 + 1 × Fixed Fiber (SC/ST/FC) · DC 24V/48V/AC 220V
Project-Based Pricing
Volume & combo discounts — get your quote
In-stock models: 3 days to your forwarder's warehouse in China after payment · Out-of-stock: 7–15 working days · then air 5–10 days or sea 25–45 days to your port
Get Best Price on WhatsAppRequest a quote ↓Terms · Sample orders welcome · Quotation / PI fixes models, prices, Incoterms (EXW or FOB, each quoted separately), lead time and T/T payment · Defective units: free spare units agreed per order (quantity depends on order size) and written into the quotation · Warranty: up to 5 years on Zhongxin Shutong industrial switches, manufacturer warranty on other brands · Full terms, warranty & RMA
Need the PDF datasheet? Get it on WhatsApp →How to get a better price
Volume DiscountOrder 50+ pcs of this model
CONTACT US
Project Combo DiscountMix any categories & models storewide in one order — no quantity limit
BIGGER
Verified Project DiscountDistributor, integrator or end user with a real project? Send the BOQ — project pricing plus free system design. Partner projects are protected: we never quote your end customer behind you
BIGGEST
All discounts are quoted personally — message me on WhatsApp ↑
◆Fiber Media Conversion
◆2FE/GE + 1 Fixed Fiber
◆DIN-Rail / Wall Mount
◆DC 24V/48V/AC 220V
◆-40 ~ 75°C · IP40
◆5-Year Warranty
Overview
The ZJIC200-3 is an industrial fiber media converter that converts 2 × 10/100Base-T (or 10/100/1000Base-T) copper Ethernet to a single fixed 100Base-FX (or 1000Base-X) fiber port, with SC/ST/FC connector and single/dual fiber options. It uses store-and-forward switching with a 1K MAC address table and 1 Mbit packet buffer, and is powered by DC 24V (12–36V) or 48V (36–56V) with redundant dual input, or AC 220V (100–240V), drawing a maximum of 3 W with reverse-polarity and overload protection. Housed in an IP40 metal enclosure with DIN-rail mounting (wall-mount optional), the wide-temperature variant operates from -40 to +75°C and carries a 5-year warranty.
Is This the Right Fit?
Six real deployment scenarios matched to this model's actual datasheet specifications.
Fiber Media Conversion PointConverts 2 × 10/100Base-T (or 10/100/1000Base-T) copper Ethernet to a single fixed 100Base-FX (or 1000Base-X) fiber port — the core electrical-to-optical conversion job this series is built for.
Electrical Cabinet DIN-Rail MountDefault DIN-rail mounting plus wide-range DC 24V (12–36V) / 48V (36–56V) redundant input fits naturally inside control cabinets and junction boxes.
AC or DC Power Retrofit for Legacy CabinetsOrdered as a single AC 220V (100–240V) SKU or as redundant dual DC 24V (12–36V) / 48V (36–56V) SKUs, matching whichever power source — AC mains or a DC rail-cabinet bus — is already run to the installation point.
CCTV Aggregation UplinkThe -2GT1F variant's fixed 1000Base-X gigabit fiber port (single-mode up to 120 km) carries multi-camera video traffic back to a control-room aggregation switch or NVR.
Tunnel / M&E Equipment RoomEN61000-4 series Level 3 EMC immunity plus dual redundant DC 24V/48V input keeps the link alive in electrically noisy tunnel and mechanical-electrical rooms.
Outdoor Extreme-Temperature CabinetThe wide-temperature variant operates from -40 to +75°C in an IP40 metal enclosure, suited to unheated outdoor cabinets exposed to cold winters and hot summers.
Not a good fit if:
- No PoE output — connected cameras or APs on the copper side need their own power source or an external PoE injector.
- Unmanaged, single fixed fiber port per unit — no VLAN/RSTP/ring-network redundancy; not a substitute for a managed ring-topology switch.
- IP40 enclosure only — needs a cabinet or additional protection for direct outdoor rain/dust exposure.
Key Features
- 2 × 10/100Base-T or 10/100/1000Base-T copper ports
- 1 × fixed 100Base-FX or 1000Base-X fiber port — SC/ST/FC, single/dual fiber selectable
- Selectable reach: FX multimode 2 km / single-mode 20–40–60–120 km; GX multimode 0.5–2 km / single-mode 20–40–60–120 km
- DC 24V (12–36V) / 48V (36–56V) redundant dual input, or AC 220V (100–240V)
- IP40 metal enclosure · DIN-rail (default) / wall-mount · compact 32×144×95 mm
- Wide temperature -40 ~ +75°C · reverse-polarity & overload protection · 5-year warranty
Specifications
IEEE Standards
| IEEE802.3 | 10BaseT Ethernet |
| IEEE802.3u | 100Base-T(X) and 100Base-FX Fast Ethernet |
| IEEE802.3ab | 1000Base-T(X) Ethernet |
| IEEE802.3z | 1000Base-X Ethernet |
| IEEE802.3x | Flow Control |
Switching
| MAC Address Table | 1K |
| Packet Buffer | 1 Mbit |
| Forwarding | Store-and-forward |
Interfaces
| RJ45 Ports | 2 × 10/100Base-T or 2 × 10/100/1000Base-T |
| Fiber Port | 1 × fixed 100Base-FX or 1000Base-X, single/multimode, SC/ST/FC, single/dual fiber selectable |
| 100Base-FX Distance | Multimode 2 km; single-mode 20/40/60/120 km selectable |
| 1000Base-X Distance | Multimode 0.5/2 km; single-mode 20/40/60/120 km selectable |
| LED Indicators | Power, Electrical, Optical |
Power
| Terminal | 4-pin terminal |
| DC 24V Input | 4-pin terminal, dual redundant input, range 12–36V DC |
| DC 48V Input | 4-pin terminal, dual redundant input, range 36–56V DC |
| AC 220V Input | 4-pin terminal, single power input, range 100–240V AC |
| Power Consumption | Max 3 W |
| Power Protection | Reverse-polarity & overload |
Physical
| Housing | IP40 metal enclosure |
| Mounting | DIN-rail (default), wall-mount optional |
| Dimensions | 32 (W) × 144 (H) × 95 (D) mm |
Certification
| EMC | CE, FCC |
| EMI | FCC Part 15, EN 55032 (CISPR 32) Class A |
| EMS | EN61000-4-2/3/4/5/6/8 Level 3 |
| Shock | IEC60068-2-27 |
| Free Fall | IEC60068-2-32 |
| Vibration | IEC60068-2-6 |
| Green | RoHS, WEEE |
Environment
| Standard Temp | -10 ~ +60°C |
| Wide Temp | -40 ~ +75°C |
| Storage Temp | -40 ~ +85°C |
| Humidity | 5–95% non-condensing |
Reliability
| MTBF | 320,000 hours |
| Warranty | 5 years |
Models & Ordering
| Model | Product Description | Price |
|---|---|---|
| ZJIC200-2T1S-AC | Industrial fiber media converter — 2 × 10/100Base-T, 1 × fixed 100Base-FX (SC/ST/FC), AC 220V (100–240V). | |
| ZJIC200-2T1S-DCL | Industrial fiber media converter — 2 × 10/100Base-T, 1 × fixed 100Base-FX (SC/ST/FC), DC 24V (12–36V), redundant input. | |
| ZJIC200-2T1S-DCH | Industrial fiber media converter — 2 × 10/100Base-T, 1 × fixed 100Base-FX (SC/ST/FC), DC 48V (36–56V), redundant input. | |
| ZJIC200-2GT1F-AC | Industrial fiber media converter — 2 × 10/100/1000Base-T, 1 × fixed 1000Base-X, AC 220V (100–240V). | |
| ZJIC200-2GT1F-DCL | Industrial fiber media converter — 2 × 10/100/1000Base-T, 1 × fixed 1000Base-X, DC 24V (12–36V), redundant input. | |
| ZJIC200-2GT1F-DCH | Industrial fiber media converter — 2 × 10/100/1000Base-T, 1 × fixed 1000Base-X, DC 48V (36–56V), redundant input. |
This page covers the ZJIC200-3 series: -2T1S = 2 × 10/100Base-T + 1 × 100Base-FX fixed fiber; -2GT1F = 2 × 10/100/1000Base-T + 1 × 1000Base-X fixed fiber. Power suffixes: -AC = AC 220V (100–240V); -DCL = DC 24V (12–36V) redundant input; -DCH = DC 48V (36–56V) redundant input. Fiber connector SC/ST/FC and single/dual fiber selectable; 100Base-FX reach: multimode 2 km, single-mode 20/40/60/120 km; 1000Base-X reach: multimode 0.5/2 km, single-mode 20/40/60/120 km. The requested model is ZJIC200-3.
Dimensions
unit: mm
Your Brand. Factory-Direct Supply.Neutral casing, ready for your logo · Custom port/power/fiber options · Small batches welcome.
Custom & OEM →Who uses it, where it goes and how to install it
Written for the ZJIC200-3 series from its own specifications: 2 copper ports (10/100 or 10/100/1000Base-T) plus 1 fixed fiber port (100Base-FX or 1000Base-X), single-mode up to 120 km, DC 24V/48V redundant or AC 220V, max 3 W, DIN rail.
Who it is for
- CCTV installers with two devices per pole — Two cameras, or a camera plus a speaker or access controller, at one remote point share one fiber back to the NVR without a separate small switch in the box.
- Traffic, tunnel and ITS projects — A roadside cabinet with a camera and a controller or sign needs two copper ports; redundant DC 24V/48V input and Level 3 EMC immunity suit tunnel and roadside power.
- Factories and utilities — A PLC and an HMI, or an RTU and a meter gateway, in a remote cabinet reach the control room over one fiber; the 2T1S 100M version is enough for control traffic.
- Integrators who need a local service port — The second RJ45 port can stay free for a technician's laptop during commissioning and maintenance, without unplugging the field device.
Where and how to install
- Enclosure and DIN rail — Clip the 32 × 144 × 95 mm unit on the DIN rail (wall mount optional) inside a closed outdoor box or control cabinet; the IP40 housing is not rain-proof. Leave space below for the fiber patch cord bend.
- Powering the field devices — The two RJ45 ports have no PoE. Put PoE injectors or a DC supply for the cameras in the same box, and keep each copper run to the device within 100 m.
- Converter power — -DCL takes 12–36V DC and -DCH 36–56V DC on dual redundant inputs; wire two independent sources if you have them. -AC takes a single 100–240V AC input. Max 3 W, with reverse-polarity and overload protection.
- Fiber choice and handling — The fiber port is fixed, so specify single-mode or multimode, SC/ST/FC, single or dual fiber and the reach class at order time. Splice the outdoor cable in a splice tray, use a short patch cord to the unit, and clean connectors before mating.
- Grounding, surge and condensation — Ground the box, and fit surge protectors on copper cables and power lines that run up the pole; fiber itself carries no surge. Humidity is rated 5–95% non-condensing, so seal glands and add a drain or heater where nights are cold and humid. Use the -40 ~ +75°C wide-temperature model for sun-exposed boxes.
Link planning: 2T1S (100M) or 2GT1F (gigabit)
Both versions have 2 copper ports and 1 fixed fiber port. The fiber speed decides how much traffic one link carries and which unit you need at the other end.
| 2T1S · 100M | 2GT1F · Gigabit | |
|---|---|---|
| Copper ports | 2 × 10/100Base-T | 2 × 10/100/1000Base-T |
| Fiber port | 1 × 100Base-FX (fixed) | 1 × 1000Base-X (fixed) |
| Multimode reach | 2 km | 0.5 / 2 km |
| Single-mode reach | 20 / 40 / 60 / 120 km | 20 / 40 / 60 / 120 km |
| Fiber-side throughput (8 Mbps cameras, ≤70% load) | ≈ 8 | ≈ 87 |
| Matching unit at the other end | ZJIC200-3 2T1S or ZJIC200-2 1T1S | ZJIC200-3 2GT1F or ZJIC200-2 1GT1F |
| Power models | -AC / -DCL / -DCH | -AC / -DCL / -DCH |
| Power consumption | Max 3 W | Max 3 W |
- Pick 2T1S for two cameras or a PLC and HMI at one point: two 8 Mbps cameras use about 16 Mbps of the 100M fiber.
- Pick 2GT1F when a small switch with more cameras is plugged into one of the copper ports, or the link is a backbone between two buildings.
Ports, reach and power are from the ZJIC200-3 manufacturer datasheet. Camera counts assume 8 Mbps per camera and at most 70% of the fiber speed (70 ÷ 8 and 700 ÷ 8, rounded down). The ZJIC200-2 pairing is by matching fiber standard.
Industrial Fiber Media Converter FAQ — ZJIC200-3
How far can the ZJIC200-3 transmit over fiber?
In 100Base-FX mode, multimode covers 2 km and single-mode is selectable at 20, 40, 60 or 120 km. In 1000Base-X mode, multimode reaches 0.5 or 2 km and single-mode again offers 20/40/60/120 km. State the distance and single- or dual-fiber option when ordering.
What power input does the ZJIC200-3 accept?
Three options: DC 24V (12–36V range) or DC 48V (36–56V), both with dual redundant inputs on a 4-pin terminal, or AC 220V (100–240V, single input). Maximum draw is only 3 W, and reverse-polarity plus overload protection are built in.
Can it run inside hot outdoor cabinets?
The wide-temperature version operates from -40 to +75°C and the standard version from -10 to +60°C, at 5–95% non-condensing humidity. The IP40 metal housing plus EN61000-4 Level 3 EMS immunity and 320,000-hour MTBF make it suitable for sealed roadside and factory cabinets.
How is the ZJIC200-3 mounted?
DIN-rail mounting is the default and a wall-mount option is available. The case measures 32 (W) × 144 (H) × 95 (D) mm, so it fits slim control cabinets. LED indicators for power, electrical port and optical port make link checks quick after installation.
Is the ZJIC200-3 Fast Ethernet or gigabit?
Both variants exist. One converts 2 × 10/100Base-T copper ports to a fixed 100Base-FX fiber port; the other converts 2 × 10/100/1000Base-T to 1000Base-X. The fiber port ships with SC, ST or FC connector, single- or dual-fiber, so specify the speed you need when ordering.
Can I uplink IP cameras and PLCs through it?
Yes — that is its intended role: two copper devices, for example an IP camera and a PLC, share one fiber run back to the control room. Store-and-forward switching with a 1K MAC table and 1 Mbit packet buffer keeps the link stable, backed by a 5-year warranty.
Can a ZJIC200-3 at the camera end pair with a ZJIC200-2 or a switch SFP port at the control room?
Yes, as long as the fiber side matches: a 2T1S (100Base-FX) needs a 100Base-FX unit such as a ZJIC200-2 1T1S, and a 2GT1F (1000Base-X) needs a 1000Base-X unit or SFP. Fiber mode, connector, single/dual fiber and, for single-fiber links, complementary wavelengths must also match. Wavelengths are not listed, so send us the far-end model before ordering.
Do the two copper ports of the ZJIC200-3 work like a small switch?
Yes, in the unmanaged sense: it uses store-and-forward switching with a 1K MAC address table and 1 Mbit packet buffer, so the two RJ45 ports and the fiber port pass traffic between each other. There is no VLAN, so the two devices are not isolated from each other. If you must separate them, or need a ring, use a managed switch such as our ZJIES3000D series instead.
Can I daisy-chain several ZJIC200-3 units along a road or build a fiber ring?
Not over fiber. Each unit has only one fixed fiber port and no RSTP or ring protocol, so it is built for point-to-point links: one fiber, one unit at each end. For a chain of poles or a self-healing ring, use managed industrial switches with two fiber ports, such as the ZJIES3000D-4GT2GB, and keep the ZJIC200-3 for single spurs.
The fiber LED on my ZJIC200-3 stays off. What should I check?
The unit has Power, Electrical and Optical LEDs, so first confirm power is on at both ends. Then check that both ends are the same fiber standard (100Base-FX with 100Base-FX, 1000Base-X with 1000Base-X) and the same fiber mode; on dual-fiber links swap TX and RX at one end; on single-fiber links make sure the two units are a matched pair. Finally clean the connectors and check the patch cords and splices.
For the gigabit ZJIC200-2GT1F on multimode, should I choose 0.5 km or 2 km?
Choose by the measured cable length plus margin: 0.5 km covers runs inside one building or between close buildings, and 2 km covers longer campus runs. Gigabit reach on multimode also depends on the fiber grade already installed, so tell us the cable type when ordering. For anything beyond 2 km, use single-mode at 20, 40, 60 or 120 km.
What power connector does the ZJIC200-3 have, and do I need to confirm it before ordering?
Yes, please confirm the power connector with us before ordering. For Zhongxin Shutong products the power input type and connector can differ between versions and batches, so tell us your supply (AC or DC and the voltage), how you will wire it in the cabinet and your country's plug standard, and we confirm the exact connector and supply version of the ZJIC200-3 for your order.
Ordering questions — samples, shipping, payment, lead time and genuine stock — are answered once on our FAQ page.
Our own line — Zhongxin Shutong industrial switches1,500 m² clean rooms100% port-by-port tested-40…+75 °C rated, cycled to +85 °CEN 61000-4 Level 3 EMC immunitySerial-number traceability on every unitISO 9001 · 14001 · 27001 · CMMI L3See the factory →See all certifications →
Every order, any brand: there is no return policy — defective units are covered by free spare units agreed per order and written into the quotation. Warranty up to 5 years on the Zhongxin Shutong industrial line, manufacturer warranty on other brands. Terms, warranty & RMA
Request a quote for this product
An engineer replies within 24 hours on working days with model check, price and lead time. No obligation, no newsletters.
Product: ZJIC200-3
For a fast, exact quote tell us: model or requirement · quantity · destination country / port · EXW or FOB · deadline.